Simple and easy Online Pdf to Word Converter

Many software are offered for convert document into another format of document, including for convert Pdf document to Word document. Each software has different features and benefits and of course need for spend an amount of money to buy it software for long time. In this case, there are an online media that provides free of service to convert pdf to word online. These media has named PDF2Word Online.

This online document converter are specific to convert pdf document to word document. PDF2Word Online work by uploading your file and in some moment time according to the big of size of your file your pdf document will be converting as word document.

How to convert your pdf file to word document over PDF2Word Online?

At the first time you must log on to their website that is http://www.pdfonline.com/pdf2word/index.asp. To open website of course you must have an established internet connection, not needed requiring for installing anything, just going to the internet cafe or using your laptop with hot spot connection, and other resources.

Look at the picture below: it is a picture when you was log on to PDF2Word Online website. From their website, to convert your pdf file you just click on the browse and find where your pdf file are located. After finishing browse your pdf file, teh last step is click on the Upload and Convert button.

In a few minutes your pdf document will be convert and the result is Word document.

Continue reading »»

Share |

Repair Windows Xp: Corrupt or Missing with NTOSKRNL

If You are using windows operating system and has experience with an error message that seen “NTOSKRNL not found” on your windows operating system what should we do to fix this problem? Here are step by step to fix and solve this problem without reinstalling your windows.

Some preparation to perform this action including CD or DVD R/RW drive, the same version CD Master of Windows XP that has missing or corrupt on NTOSKRNL, and some knowledge base of Disk Operating System (DOS) command prompt and of course will spend your time and concentration and a cup of tea.

Here are step by step repairing windows Xp with Corrupt or Missing on NTOSKRNL:

1. Put Cd master Windows Xp on CD/DVD R/RW drive and booting up from CD.
2. After finish from booting up, there are will shown to you three option that is:
   
   To Setup Windows XP now, press ENTER ( this option will reinstalling windows with newly and all program that has been installed on windows that broken will be destroyed).
   
   To Repair a Windows Xp installation using Recovery Console, press R (this option will repair your windows with the same version of Windows Xp that are broken.
   
   To quit Setup without installing Windows Xp, press F3 (this option will quit Setup without installing Windows).
   
   
3. Choose option 2 to repair your windows using recovery console. To choose this option just press R key on your keyboard
4. After press R key, it will appears on your screen that will asking to you to choose where is the location of windows that will be repair using recovery console from Cd master. So, just press number accordance with the location of your windows that you want to repair. Usually press #1
   
5. Move to CD drive which where containing the cd master of Windows Xp using command prompt.
6. Make sure the command from are on the CD drive and then write CD i386
7. Write: “ntkrnlmp.ex_ C:\Windows\System32\ntoskrnl.exe”
8. If your windows are installed on different directory or drive, so you just only change “C:\Windows\System32\ntoskrnl.exe” with the new place or directory according to the location where the windows xp are installed.
9. Release your CD master of Windows Xp from cd/dvd drive and write Exit and then press ENTER on your keyboard.
10. Finish, and Computer will be restart.
    

Continue reading »»

Share |

Repairing Windows Xp operating system Without Re-installing Windows

Every computer operating system can be damaged and can’t work by some reasons, including attacking by virus, human error or because windows lost or missing files .dll. Some people try to repair their windows that are broken by new reinstalling again with the same version of window and some others don’t want to reinstalling it and just repair their windows.How repair Windows Xp that are broken or not working or run.

If your windows xp operating system are broken (corrupted), which where you didn’t have dual opearting system on your computer for booting system. You can try to reapiring your windows (in windows opeating system also called “repair install”), if this step successfull the repair install option will work and run just like configuration setting that will be repair. Here are step by step to do this action:

1. Make sure you have a valid key of Windows Xp that you will Make sure you have a valid key of Windows Xp that you will be repair.
2. It will be take a time approximately less than half o’clock to one hours according to the specification of computer.
3. If during installation and system ask to you and Administrator Password, you should try option number two not number one that is repair option.
4. First, you have to setting up BIOS to make first boot from CD/DVD R/RW.
5. Insert CD master of Wndows XP that version are same as with the old windows xp that broken and boot from CD.
6. After booting are finished, it will showing to you three option that is:
   
   To Setup Windows XP now, press ENTER ( this option will reinstalling windows with newly and all program that has been installed on windows that broken will be destroyed).
   
   To Repair a Windows Xp installation using Recovery Console, press R (this option will repair your windows with the same version of Windows Xp that are broken.
   
   To quit Setup without installing Windows Xp, press F3 (this option will quit Setup without installing Windows).


7. Chose option number two to Repair your windows
8. To go to the next step, press F8 Key for accepting an agreement (“I Agree at the Licensing Agreement”) from Microsoft corporation to installing a Windows Xp operating system.
9. Next, press R button when the place of directory Windows Xp are installed. Usually on C:\WINDOWS.
10. Then system will checking on on the drive C and starting for copying files. And your computer will restart automatically if necessary. So lets your cd master of windows Xp on the CD/DVD.
11. During reparation the system will showing to you progressing of Setup that are the part of repairing your windows. It is look like as common installation of windows operating system newly, including “Collecting Information, Dynamic Update, Preparing Installation, Installing Windows, Finalizing Installation”.
12. When system asking to you to enter a valid key of your Windows Xp, enter a valid key.
13. Normally you want to configure your setup Domain or Workgroup same as with the old windows that are damaged.
14. After all entry of windows setup are done, your computer will restart and then you will have the same screen on your monitor just like activation system when on the normal installation
15. Register your system if necessary.
16. Done, and now you can log in with already account.
    

Continue reading »»

Share |

Trouble on Mouse

There are two type problem on mouse as input device of computer including unknown of mouse and damage or broken on mouse or port of mouse it self. How to identifying mouse problem and how to fix and solve it. On the below article will try and guide you to understanding and identifying your mouse problem by your self. It will not spending a lot of time than you go to an computer troubleshooter and of course will spend your time and your money. So save your time and money for others.

Unknown mouse

If at the first time when you turn in on your computer and the mouse are anknown by your operating system, there are some possibility that can causing this problem, including:

1. The cable of your mouse not connected properly on the port connector of mouse. So, check the these line of cable, and also give notice possibility if there are lost on cable of mouse.


2. Possibility number two is driver of the device for your mouse is not installed correctly. If your computer using Dos operating system, driver of the device for your mouse commonly can be placed on CONFIG.SYS file or AUTOEXEC.BAT file, check both these two file and file location place of these file.


3. If your computer using windows operating system, you can check it on the properties of system through device manager. Here are ways to goes to device manager from your desktop right click on the My Computer>>Choose Properties>> Choose Hardware >>Device Manager. If the your are installed correctly it will showing to you like picture below.

Damaging on mouse or port of mouse it self.

To make sure if there is damaging on mouse of port of your mouse it self, you can try with change your mouse with another one. The commonly problem is mouse can’t function properly. The abnormality from your mouse might because:

1. Your mouse has been identifying by operating system but not function. Usually this problem is experience by who are usage windows operating system. Mouse just seen as a cursor, and sign of arrow or other sign of mouse on the center from screen of the monitor, and can be movement. This problem might because damaging on mouse or the driver of mouse is not appropriate. To fix this problem you can try to remove these driver by uninstalling it and then detect your mouse again by wizard from system and also prepare the right driver from your mouse. If the mouse are detected and still not working properly, so the possibility is damaging on your mouse.


2. Your mouse run stagnant or the cursor jumps around. You can fix this problem with try to repairing the drive device of mouse or setting up mouse speed from Control Panel. If not working too, open cover of mouse and try to cleaning mouse ball place.


3. If the mouse button not responding correctly, try to set it from control panel via mouse speed. In addition you can also try to cleaning mouse button with contact cleaner liquids.
   

Continue reading »»

Share |

Maximize, Improve and increasing Wi-fi Connection

If we talking about Wi-fi connection, the first thing and the main factor and it is very determining to improve and increasing and getting your faster speed of your wi-fi connection is about location or place. Therefore, place your Wi-fi router at the spot that possibility all your computer get good and the best signal.

What about the ideal Wifi connection? The ideal Wi-Fi connection is Wi-Fi should be placed on the top and highest place in your home all office which where your Wifi established. Why in the highest places on your home or office? We should to do like this in order to covering network connection properly.

How to check, which where place that can covering network connection properly?

First, place your Wi-fi router closely or in the one room with your modem broadband, then connected usage Notebook Wireless, after connected, walking around with that notebook to all of the room and notify the strength of the signal that captured by wireless adapter administration software, usually as far as distance so the strength of the signal is also down.

The other factor that influence on the wifi connection is medium or media, and the media that has very big influence to Wi-Fi connection is Metal, Wall / Stone, Human, cordless phone and water. All those media can cause rebound or reflection of the signal that has been captured or can infiltrate the signal of connection so that the signal that will be capture or received by your wireless on notebook will be very slow.

Conclusion

The ideal for placing your Wi-Fi router is on the highest place and as far as possible from a wall, and don’t place your Wi-Fi router closely with the window, because it is will because your Wi-fi connection will be go out or leak and make your connection slowdown, unless if you want to perform an wifi connection from outside.

For 802.11g Wi-Fi network that have range of frequency 2.4 GHz, almost same as with Microwave frequency (radio waves on the cordless phone). By activating a WEP or WPA can also increasing speed of data transferring significantly.

Continue reading »»

Share |